INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
Page 29 of 77
12.3 Adjustment of ultrasound sensor sup-
port (standard on some models)
Ultrasound sensor support (
Fig. 41 - Fig. 42 ref. 1
)
must be used in the “fully-lowered” position, as shown
in
Fig. 41
.
However with wheels with great diameter, you can set
it higher so that the wheel can be mounted easily onto
the chuck (see
Fig. 42
).
In order to carry out the adjustment, just loosen the
handwheel (
Fig. 42 ref. 2
) and place the support in
the wished position.
At the end tighten the handwheel (
Fig. 42 ref. 2
).
Fig. 41
Fig. 42
For what concerns exceptionally large wheels, sensor
support may be moved outside the loading space of
the same wheel, so that it can be easily mounted onto
the chuck:
- slacken the handwheels (
Fig. 43 ref. 1
) fixed to the
protection guard’s tubular and open sensor support
(
Fig. 43 ref. 2
) by making it slide in the slot (
Fig. 43
ref. 3
).
- slacken handwheel (
Fig. 43 ref. 4
)and raise sensor
support (
Fig. 43 ref. 5
) then move it to the position
required, as indicated in
Fig. 44 ref. 1
.
At the end tighten the handwheel (
Fig. 44 ref. 2
).
1
Fig. 43
4
3
2
5
Fig. 44
1
2
IF ACTIVATED, EACH TIME THAT
THE WHEEL PROTECTION GUARD
IS LOWERED, THE DEVICE DE-
TECTS AUTOMATICALLY THE DI-
MENSION OF THE WHEEL WIDTH.
1297-M005-03
RAVAGLIOLI S.p.A.
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
