EN
Page 34 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
•
Measuring procedure of electronic RUN-OUT with
the distance-diameter caliper arm.
The electronic RUN-OUT measuring device is useful
to check if the rim has some imperfections.
To access the screen to choose the rim control mode,
proceed as follows:
- from the "Home" page, press the button
(
Fig. 53 re. 1
) and then the button
(see
Fig. 54 ref. 1
).
1
Fig. 53
1
Fig. 54
- After entering all the required measures, you can spin
the wheel by pressing the button
and closing
the protective guard.
Standard on some models
EACH TIME THAT WHEEL PRO-
TECTION GUARD (FIG. 52 REF.
1) IS CLOSED, THE AUTOMATIC
WIDTH MEASURING DEVICE UNIT
(FIG. 52 REF. 2) MEASURES THE
WIDTH OF THE WHEEL THAT
IS MOUNTED ON THE CHUCK
AND PERFORMS THE SPIN. THE
RELEVANT VALUE IS STORED
AUTOMATICALLY IN THE PRE-AR-
RANGED FIELD OF THE CHOSEN
BALANCING PROGRAM.
Fig. 52
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
