EN
Page 60 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
15.1.3 User management
The "User Management" function is disabled on ma-
chine delivery. To enable it, proceed as described in
Para 15.1. After enabling, the icon will be displayed on
every page (
Fig. 71 ref. 1
). The wheel balancers can
be used simultaneously by 4 different users.
2
1
Fig. 71
1
Fig. 72
Press button
, shown on the monitor (
Fig. 71
ref. 2
) or select the field (
Fig. 72 ref. 1
) and subse-
quently press the button
to display the screen
page below:
A
B
KEY
A – Program used in the last carried out spin
B – Acquired measurements for the last carried
out spin
Press any of the available numbers on the buttons at
the bottom of the page to select the corresponding user.
The system stores the data relating to the last per-
formed spin according to the different operators. You
can recall the desired user each time the program dis-
plays the specific button (
Fig. 71 ref. 2 and Fig. 72
ref. 1
). The measurements stored for each user are
lost when the machine is switched off.
User management is valid for any wheel balancer
function.
TO ENABLE OR DISABLE "USER
MANAGEMENT" FUNCTION, SEE
PARAGRAPH 15.1. IF THE FUNC-
TION IS DEACTIVATED, BUTTON
IS DISPLAYED.
15.2 Enabling of electronic Run-out measur-
ing device (optional)
From the main page “Home” press the button
to move to the next screen page and the button
to access the user menu. On the monitor, the follow-
ing screen appears where you can enter the password.
The user login password is:
1234
.
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
