INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
Page 69 of 77
When the button is pressed
the measure is
displayed and the monitor will show the following
screen page:
Replace the small wheel (13”/14”) with the large one
(18”/19”) and repeat the previously described opera-
tions. At the end of the calibration, the following screen
page will be displayed:
The calibration of the laser is finished.
15.3.5 Touch screen monitor calibration (for
touch screen monitors) (optional)
Press the button
(
Fig. 74 ref. 5
) to display the
following screen page on the monitor:
Press the intersection of the lines that appear on the
monitor. The points on which you need to press will
be 4 and positioned near the corners of the monitor.
The calibration of the monitor is finished.
1297-M005-03
RAVAGLIOLI S.p.A.
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
