Page 16 of 37
INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Version with tubeless inflation
The inflation pedal has two functions. The supply of
air at a controlled pressure as in the previous version,
and a second function of a jet of air from the inflation
nozzle to assist the beading in of the tyre.
DO NOT CHANGE THE SET OP-
ERATING PRESSURE VALUE BY
MEANS OF THE MAXIMUM PRES-
SURE VALVES. THE MANUFAC-
TURER SHALL NOT BE RESPON-
SIBLE FOR INJURY OR DAMAGE
ARISING FROM UNAUTHORISED
CHANGES.
KEY (pedal
ref.
_
B
)
ref. 1 - Tyre inflation with pressure gauge
ref. 2 - Tyre inflation with pressure gauge + infla-
tion nozzle
Fig.
_
14
• Push buttons
“F”
have a maintained action position
and they control the vertical translation of the upper
bead breaker roll. When pressed in its lower part
(F2), it operates the downwards translation. When
pressed in its upper part (F1), it operates the up-
wards translation. When push button (F1) is pressed,
the release of the cam of the upper bead breaker roll
is also operated, if it has been previously introduced
with push button (D).
• Push buttons “
G
” have a maintained action posi-
tion and they control the vertical translation of the
lower bead breaker roll. When pressed in its lower
part (G2), it operates the downwards translation.
When pressed in its upper part (G1), it operates
the upwards translation. When push button (G2)
is pressed, the release of the cam of the lower bead
breaker roll is also operated, if it has been previously
introduced with push button (E).
• Push button
“H”
has a maintained action position.
When pressed, it controls the tool vertical down-
wards translation.
• Push button
“I”
has a maintained action position.
When pressed, it controls the tool vertical upwards
translation.
11.2 Pedalboard
“Pedal A”
has two maintained action operative posi-
tions. When it is pushed downwards it controls man-
drel motor clockwise rotary movement. When the pedal
is lifted upwards it operates the opposite movement.
NOTE:
The mandrel unit speed can be continuously
adjusted up to the maximum speed through
a progressive pressure on the pedal, only in
clockwise direction.
“Pedal B”
has a different function according to the
version present on the machine.
Version with inflation with pressure gauge
The inflation pedal in this version has only one func-
tion. A continuous pressure supplies air at a controlled
pressure (max 4 ± 0,2 bar 60 PSI).
DO NOT CHANGE THE SET OP-
ERATING PRESSURE VALUE BY
MEANS OF THE MAXIMUM PRES-
SURE VALVES. THE MANUFAC-
TURER SHALL NOT BE RESPON-
SIBLE FOR INJURY OR DAMAGE
ARISING FROM UNAUTHORISED
CHANGES.
G1180.30SLIM - G1180.30SLIMIT
7105-M002-10_R
RAVAGLIOLI S.p.A.
