INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 23 of 60
7 2 3 4 5 6 8
9
1
Fig. 34
KEY
1 – Monitor
2 – Function push button (red)
3 – Function push button (yellow)
4 – Function push button (grey)
5 – Function push button (blue)
6 – Function push button (green)
7 – Previous page push button
8 – Next page/print push button
9 – Push-button panel (push-button panel with 7 keys)
14.0 WHEEL BALANCING
14.1 Switching the machine on and off
Press the "ON" switch (
Fig. 23 ref. 1
), located in the
rear part of the equipment.
IN THE CASE OF PNEUMATIC
MODELS, ON STARTING, THE
PNEUMATIC MANDREL IS AL-
WAYS OPENED. ALWAYS KEEP
YOUR HANDS AND OTHER PARTS
OF THE BODY AWAY FROM THE
MOVING MANDREL.
ALSO TAKE CARE IF A WHEEL
IS ALREADY FITTED ON THE
MANDREL, AS THIS COULD BE
FORCED OFF THE SHAFT DUR-
ING THE OPENING OF THE MAN-
DREL ITSELF.
Wait a few seconds until the complete loading of the op-
erational program. The equipment is ready to operate
when the main screen “Home” appears on the monitor..
Fig. 35
1
2 3
4
5
A B C
DURING MANDREL OPENING/
CLOSING OPERATIONS, BE CARE-
FUL TO KEEP YOUR HANDS AND
OTHER PARTS OF THE BODY
AWAY FROM THE MANDREL.
13.0 CONTROL PANEL
The wheel balancers are equipped with a control panel
equipped with a keyboard to interact/operate the con-
trols presented in graphical form on the monitor.
On the monitor are displayed all the instructions for the
correct wheel balancing, for example indicating where
the operator shall fit adhesive or clip weights and the
balancing mode and/or option used, as well as correct
wheel rotation for inner/outer weights positioning.
KEY
A – Displaying operations/information area
B – Colours for identification of the buttons to be
used
C – Function icons
1 – Programs and measurements acquisition but-
tons
2 – Wheel spin push-button
3 – Go to next page
4 – Pneumatic mandrel opening/closing (only
for GP3.140R - GP3.140RS models)
(generally used in case of emergency)
5 – User management (if enabled)
(user management is not enabled on ma-
chine delivery)
1297-M007-1_R
G3.140R - GP3.140R - G3.140RS - GP3.140RS
RAVAGLIOLI S.p.A.
