Gas:
G30 - 37 mbar
Category:
I3B/P
PIN
0063CU7710
Country o destination
PL (Poland)
The device can be supplied with gas in family 3: 3B/P
–
propane butane.
To connect the gas, use a pressure reducing valve with the rated gas pressure of 37 mbar and flexible hose.
The hose should be secured to the regulator and the appliance with hose clips.
Make sure the flexible hose
could not come in contact with hot surface and avoid twisting.
Use a suitable regulator that is certified to EN 16129. To connect the gas, use a pressure reducing valve with
the rated gas pressure of 37 mbar.
Please consult your LPG dealer for information regarding a suitable regulator for the gas cylinder.
Regulator and Hose
Use only regulators and hose approved for LP Gas at the above pressures (37 mbar). The life expectancy of the
regulator is estimated as 2 years.
The use of the wrong regulator or hose is unsafe; always check that you have the correct items before operating.
The hose used must conform to the relevant standard for the country of use. Worn or damaged hose must be
replaced.
Summary of Contents for OG-300
