CLEANING
Attention!
Always un-plug the heater from the outlet. Allow it to cool down before cleaning.
Clean the outside of the heater by wiping with a dry or slightly wet cloth and buff with a dry cloth.
Do not use any detergents or abrasives and do not allow any water to enter the heater.
Do not submerge in water!
Regular and careful cleaning helps your heater to operate efficiently for many years.
1.
Unplug your power cable for your safety before cleaning your appliance.
2.
Take out the front grid wire through the inlets on the frame using a slotted screwdriver.
3.
The reflector and filament must be cleaned with a soft cloth, a smooth brush
or cool or dry air. The cloth may be damp but never too wet and the cleaner should
not include any chemicals.
4.
Refrain from using cleaning materials likely to damage the reflector (cleanser etc.).
5.
Reinsert the wire grid using a slotted screwdriver.
FAILURES
If any damage is disclosed after purchase, contact the seller.
Follow the rules in this manual.
Do not modify the product.
When the device does not work, unplug it. Check if there is power in the socket the device
is connected to.
If power was not disrupted, do not attempt to repair the device on your own. Contact
manufacturer's authorized service centre.
TECHNICAL SERVICE
All devices undergo a thorough post production control. If you still find any fault, you can
ask technical service for help.
Before you talk to technical service, check if:
•
There is power in the wall socket.
•
You followed this manual when turning the device on.
TRANSPORT AND STORAGE
•
When the heater is not used for long periods of time, it should be protected from dust
and stored in a clean, dry place.
•
Store out of reach of children. Protect against dust, humidity, and mechanical damage.
•
Transport in the original packaging. Protect against dust, humidity, and mechanical damage.
•
Always let the device cool down prior to storage or transport.
NOTE !
The illustrations and descriptions may differ from reality depending on the product model.
Manufacturer reserves the right to change the technical parameters of the device without
notice.
