ERVICE
S
24
6823346-R3
3.1-3
Parameter Table
(continued)
Parameter
Number
Function
Software
Version
Default Settings
Available Setting Options
EU
US
63
Auto shut-off time forks
3
3
0 = never off
1 = 30 min
2 = 1 hour
3 = 2 hour
64
Sleep time indicator if used
0
0
0 (not used), 1 – 99 min
65
Auto shut-off time backlight
20
20
off, 20, 40, 80, 160, 320 sec
66
Backlight brightness
100
100
100%, 75%, 50%, 25%, 0%
(
NOTE:
0% means the backlight is off)
67
Low bat switch off time forks
10
10
0 = never off, 1 – 99 min
68
Buzzer function active
Before 2.15
off
off
off, on = direct OR on = 2 sec delay
2.15 & 2.18
no
no
Yes, No
69
Disable buttons
NOTE:
Use this option only if P16 is set
to one of following numbers: 1 - 14.
A
0
0
0 = All buttons and additional options
are enabled
1 = Disable Tare function
2 = Disable Tare and Sum functions
3 = Disable Tare, Sum and Entry
Mode functions
70
Tare clear
2.18
no
no
No = Tare remains in memory after
new weight has been picked
Yes = Tare is cleared after new
weight is picked (
NOTE:
This is
default when P13 is selected as
"OIML".)
80
Digital corner calibration active
0
0
0 = enabled
1 = disabled
81
Compensation factor digital corner A
1.000
1.000
Do not change value after the forks
are calibrated (corner calibration).
82
Compensation factor digital corner B
1.000
1.000
Do not change value after the forks
are calibrated (corner calibration).
83
Compensation factor digital corner C
1.000
1.000
Do not change value after the forks
are calibrated (corner calibration).
84
Compensation factor digital corner D
1.000
1.000
Do not change value after the forks
are calibrated (corner calibration).
85
Pairing iForks to the display via
bluetooth connection (Refer to Section
3.3-1)
NOTE:
Only enter this parameter to
establish a complete new bluetooth
connection. Enter last 6 characters
of MAC address of Fork 1 and Fork 2
or cancel by pressing "CLR" button.
A
Some software versions may not offer this parameter.
