11
NOTE:
This inflation adaptor will automatically open the
valve when inserted and will close the valve when
removed. You do not need to manually open/close the
valve when using this special adaptor.
If you will be using a shop vacuum or other
inflation device with a larger nozzle, use
the 1 ¼” diameter coupler (included)
between the valve adaptor and the hose of
your inflator. Make sure the hose is
attached to the blower port of the
vacuum for inflation. Insert the adapter
into the air valve and lock into place by
turning clockwise.
Inflate until the tube is firm and resistant to pressure. Your fist
should create only a slight depression when pushed against
the tube. Replace cap to ensure an air tight seal.
To check the exact pressure of your product the use of a RAVE Digital
Pressure Gauge (Item #02496) is recommended.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2.5 PSI (0,17 bar)
if filling with
compressed air. Excessive pressure can cause the
tube to rupture with potentially damaging force to
eyes, ears, skin and limbs. Use of an air compressor
or over-inflation can rupture the tube beyond repair,
thus voiding the warranty.
!!
Coupler
Adaptor