background image

Precautions

ALWAYS KEEP THESE INSTRUCTIONS.  DO NOT THROW THEM AWAY

NEVER  EXPOSE  THIS  EQUIPMENT  TO  RAIN,  MOISTURE,  ANY  DRIPPING  OR

SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP

OF THIS DEVICE.

DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A
BOOKSHELF  OR CLOSET. ENSURE THERE IS ADEQUATE VENTILATION TO COOL
THE UNIT. DO NOT  BLOCK THE VENTILATION OPENINGS.

DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS.

DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR

OTHER APPARATUS THAT PRODUCE HEAT

DO  NOT  PLACE  THIS  UNIT  IN  ENVIRONMENTS  WHICH  CONTAIN  HIGH

LEVELS  OF DUST, HEAT, MOISTURE OR VIBRATION

THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS

PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK

ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER

UNPLUG  THIS  APPARATUS  DURING  LIGHTNING  STORMS  OR  WHEN  UNUSED

FOR LONG PERIODS OF TIME

ONLY CONNECT THIS UNIT TO A MAIN SOCKET OUTLET WITH PROTECTIVE

GROUND CONNECTION

READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY

CAUTION

This  product  contains  high  voltage,  please  ensure  you  follow  the  safety  guidelines 

when installing this product.

These symbols warn that there are no user serviceable parts inside the unit. Do not open the  unit.  Do  not 

attempt  to  service  the  unit  yourself.  Refer

 

all  servicing  to  qualified personnel. Opening the chassis 

for any reason will void the manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the 

unit,  shut  it  off  immediately  and  take  it  to  a dealer for service. Disconnect the unit during storms to 

prevent damage.

Summary of Contents for RPA120















Reviews: