background image

 ͳ

info_Raee_multilingua-v1_180720

 

ITA-Informazioni per la gestione di rifiuti di apparecchiature elettriche ed elettroniche contenenti 

pile e accumulatori 

Questo simbolo che appare sul prodotto, sulle pile, sugli accumulatori oppure sulla loro confezione o sulla loro 

documentazione, indica che il prodotto e le pile o gli accumulatori inclusi al termine del ciclo di vita utile non devono 

essere raccolti, recuperati o smaltiti assieme ai rifiuti domestici. 

Una gestione impropria dei rifiuti di apparecchiature elettriche ed elettroniche, di pile o accumulatori può causare 

il rilascio di sostanze pericolose contenute nei prodotti. Allo scopo di evitare eventuali danni all’ambiente o alla 

salute, si invita l’utilizzatore a separare questa apparecchiatura, e/o le pile o accumulatori inclusi, da altri tipi di 

rifiuti e di consegnarla al centro comunale di raccolta. È possibile richiedere al distributore il ritiro del rifiuto di 

apparecchiatura elettrica ed elettronica alle condizioni e secondo le modalità previste dal D.Lgs. 49/2014.

 

La raccolta separata e il corretto trattamento delle apparecchiature elettriche ed elettroniche, delle pile e degli 

accumulatori favoriscono la conservazione delle risorse naturali, il rispetto dell'ambiente e assicurano la tutela 

della salute.

 

Per ulteriori informazioni sui centri di raccolta dei rifiuti di apparecchiature elettriche ed elettroniche, di pile e accumulatori è necessario rivolgersi 

alle Autorità pubbliche competenti al rilascio delle autorizzazioni.

 

ENG-Information for management of electric and electronic appliance waste containing batteries or accumulators 

This symbol, which is used on the product, batteries, accumulators or on the packaging or documents, means that at the end of its useful life, 

this product, the batteries and the accumulators included must not be collected, recycled or disposed of together with domestic waste. 

Improper management of electric or electronic waste or batteries or accumulators can lead to the leakage of hazardous substances contained in 

the product. For the purpose of preventing damage to health or the environment, users are kindly asked to separate this equipment and/or 

batteries or accumulators included from other types of waste and to arrange for disposal by the municipal waste service It is possible to ask your 

local dealer to collect the waste electric or electronic appliance under the conditions and following the methods provided by national laws 

transposing the Directive 2012/19/EU. 

Separate waste collection and recycling of unused electric and electronic equipment, batteries and accumulators helps to save natural resources 

and to guarantee that this waste is processed in a manner that is safe for health and the environment. 

For more information about how to collect electric and electronic equipment and appliances, batteries and accumulators, please contact your local 

Council or Public Authority competent to issue the relevant permits. 

FRA-Informations relatives à la gestion des déchets d'appareils électriques et électroniques contenant des piles et des 

accumulateurs 

Ce symbole présent sur le produit, sur les piles, sur les accumulateurs, sur l'emballage ou sur la documentation de référence, indique que le 

produit et les piles ou les accumulateurs ne doivent pas être collectés, récupérés ou éliminés avec les déchets domestiques au terme de leur vie 

utile. 

Une gestion impropre des déchets d'équipements électriques et électroniques, des piles ou des accumulateurs peut causer la libération de 

substances dangereuses contenues dans les produits. Pour éviter d'éventuelles atteintes à l'environnement ou à la santé, on invite l'utilisateur à 

séparer cet appareil, et / ou les piles ou les accumulateurs, des autres types de déchets et de le confier au service municipal de collecte. On peut 

demander au distributeur de prélever le déchet d'appareil électrique ou électronique aux conditions et suivant les modalités prévues par les 

normes nationales de transposition de la Directive 2012/19/UE. 

La collecte sélective et le traitement correct des appareils électriques et électroniques, des piles et des accumulateurs, favorisent la conservation 

des ressources naturelles, le respect de l'environnement et assurent la protection de la santé. 

Pour tout renseignement complémentaire sur les modalités de collecte des déchets d'appareils électriques et électroniques, des piles et des 

accumulateurs, il faut s'adresser aux Communes ou aux Autorités publiques compétentes pour la délivrance des autorisations. 

 

NLD-Informatie voor het beheer van afgedankte elektrische en elektronische apparatuur die batterijen en accu's bevat 

Dit symbool, dat op het product, op batterijen, op accu's, op de verpakking of in de documentatie ervan staat, geeft aan dat het product en de 

batterijen of accu's aan het einde van de gebruiksduur niet samen met het huishoudelijke afval mogen worden ingezameld of verwijderd. 

Een onjuist beheer van afgedankte elektrische en elektronische apparatuur, batterijen of accu's kan leiden tot het vrijkomen van gevaarlijke 

stoffen in de producten. Om schade aan het milieu of aan de gezondheid te voorkomen, wordt de gebruiker aangemoedigd om deze apparatuur 

en/of de meegeleverde batterijen of accu's van andere soorten afval te scheiden en af te leveren aan de gemeentelijke ophaaldienst. Het is 

mogelijk om de distributeur te vragen om de afvalinzameling van elektrische en elektronische apparatuur uit te voeren volgens de voorwaarden 

en de voorschriften die zijn vastgelegd in de nationale bepalingen ter uitvoering van Richtlijn 2012/19/EU. 

De gescheiden inzameling en correcte behandeling van elektrische en elektronische apparatuur, batterijen en accu's bevorderen het behoud van 

natuurlijke hulpbronnen, respect voor het milieu en zorgen voor de bescherming van de gezondheid. 

Voor meer informatie over de inzameling van afgedankte elektrische en elektronische apparatuur, batterijen en accu's is het noodzakelijk om 

contact op te nemen met de gemeenten of de bevoegde overheidsinstanties. 

 

DEU-Informationen für die Entsorgung von elektrischen und elektronischen Altgeräten, die Batterien und Akkus enthalten 

Dieses Symbol auf dem Produkt, auf den Batterien, auf den Akkus, auf deren Verpackung oder in deren Unterlagen weist darauf hin, dass das 

Produkt und die Batterien oder Akkus am Ende ihrer Lebensdauer nicht zusammen mit dem normalen Hausmüll gesammelt, verwertet oder 

entsorgt werden dürfen. 

Eine unsachgemäße Entsorgung von elektrischen und elektronischen Altgeräten, sowie von Batterien oder Akkus kann zur Freisetzung gefährlicher 

Stoffe im Produkt führen. Um mögliche Umwelt- oder Gesundheitsschäden zu vermeiden, wird der Benutzer aufgefordert, dieses Gerät bzw. die 

Batterien oder Akkus von anderen Abfallarten zu trennen und der kommunalen Sammelstelle zu übergeben. Außerdem ist es möglich, den Händler 

um die Rücknahme der elektrischen und elektronischen Altgeräte unter den in den nationalen Vorschriften zur Umsetzung der Richtlinie 

2012/19/EU vorgesehenen Bedingungen zu bitten. 

Die getrennte Sammlung und die ordnungsgemäße Verwertung von elektrischen und elektronischen Altgeräten, Batterien und Akkus fördert die 

Erhaltung der natürlichen Ressourcen, respektiert die Umwelt und gewährleistet den Schutz der Gesundheit. 

Für weitere Informationen zur Sammlung von elektrischen und elektronischen Altgeräten, Batterien und Akkus wenden Sie sich bitte an die für 

die Erteilung von Genehmigungen zuständigen Kommunen oder Behörden. 

 

 

Summary of Contents for Flexi 7





























































Reviews: