Use and maintenance manual RBC 8010 - RBC 8012
Rev.0 17.07.19
EN
Pag.46
Do not touch the hot surfaces of the stove without suitable
protective equipment, to avoid getting burned. When it is
running, the outer surfaces reach hot temperatures to
the touch.
It is forbidden to make unauthorised changes to the
stove.
Before using the stove it is necessary to know the position
and function of the controls.
If the chimney catches fire you must call the fire brigade.
Only use original spare parts. Any tampering and/or
replacements that have not been authorised by Ravelli
can pose a danger to the user’s safety.
In the event of particularly adverse weather conditions,
the safety systems could intervene and switch off the
stove. In any case, doe not disable the safety systems.
Residual risks
The stove was designed so as to guarantee the user’s essential
safety requirements.
Safety was integrated into the stove’s design and construction as
much as possible.
For every residual risk there is a description of the risk and the zone
or part that is applies to (unless the risk applies to the entire stove
overall). Procedure-related information is also provided on how to
avoid the risk and on the correct use of the personal protective
equipment required by and made compulsory by the Manufacturer.
DESCRIPTION OF THE STOVE
Intended use
The appliance in question is intended for:
operation
allowed fuel
forbidden
setting
Radiant and
convection
heating, by
burning:
pellet
Any fuel
other than
the permitted
ones.
Residential or
Commercial
The stove is designed and built to work safely if:
•
it is installed by qualified staff according to the specific standards;
•
it is used within the limits declared in the contract and herein;
•
the operating manual procedures are followed;
•
routine maintenance is carried out according to the times and
methods set forth;
Summary of Contents for RBC 8010
Page 2: ......
Page 183: ...DATE WORK PERFORMED MAINTENANCE...
Page 184: ...DATE WORK PERFORMED MAINTENANCE...
Page 185: ......
