Use and maintenance manual RBC 8010 - RBC 8012
Page 67
Rev.0 17.07.19
EN
ALARM
ACTIVE
ENABLE THERMOSTAT
ENABLE THERMOSTAT
MENU
MANUFACTURER
ENGINEER
USER
USER
USER
SETTINGS
SETTINGS
USER
SCREW FEEDING
SCREW FEEDING
SCREW FEEDING
DATE-TIME
DATE-TIME
ENABLE EXT. TH.
CHRONOTHERMOSTAT
CHRONOTHERMOSTAT
AIR-PELLET SET
AIR-PELLET SET
STOVE STATE
STOVE STATE
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
MENU
MANUFACTURER
ENGINEER
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
CONTRAST
FW VERSION
ADJUST
LANGUAGE
USER
USER
COMFORT CLIMA
SETTINGS
Stove State
Below are given the steps for accessing the relative menu starting from Stand-By mode.
Press the key “access
menu” to access
the
MENU page
Press the key
“confirm”
to access the
USER page
Press the key “selection”
to quickly switch to STOVE
STATE.
In this mode you can check the proper operation of the most important parameters of the appliance. Below is a list of real data of
the stove useful for service during inspection.
- Actual flow
- Fume extractor revolutions;
- Fume temperature;
- Stove state:
To exit the STOVE STATE page and return to Stand-by page, press the button repeatedly.
Settings > Enable thermostat
Below are given the steps for accessing the relative menu starting from Stand-By mode.
Press the key “access
menu” to access
the
MENU page
Press the key
“confirm” to
access the
SETTINGS
page
Press the key
“confirm”
to enable the function.
Press the key
“confirm”
to access the
USER page
Press the
key “selection”
to switch to the
function
ENABLE THERMOSTAT.
By repeadely press-
ing the key ou will go
back to the
“STAND BY”
- Actual flow set;
- Inlet flow meter temperature;
- Heated flow meter temp.;
- Electronic board temperature;
Press the key “selec-
tion” to quickly switch to
the second page of the
menu SETTINGS.
Press the key
“confirm”
to access the function
In Stand-By mode, instead of the measured and settable
ambient temperature appears the line T ON if the room
where the thermostat is installed has not yet reached
the requested value or the writing T OFF if the room
temperature set has been reached.
Summary of Contents for RBC 8010
Page 2: ......
Page 183: ...DATE WORK PERFORMED MAINTENANCE...
Page 184: ...DATE WORK PERFORMED MAINTENANCE...
Page 185: ......
