CHAPTER 3
12
Boom Recirculation Installation and Operation Manual for Case IH 50 Series Patriot Sprayers
ASSEMBLE AND MOUNT THE RETURN AND THROTTLING VALVE
FIGURE 2. Assembly of the Throttling and Electric Return Valve
1. Assemble the Electronic Recirculation Valve (P/N 334-0001-081) and throttling valve assembly as shown in
2. Mount the throttling valve to the center rack mounting bracket (P/N 107-0172-753) using two U-bolts with 1/4”
washer and 1/4” lock nuts.
3. Loop the U-bolts over the center M200 tee and secure to bracket.
NOTE:
Assemble with the cable of the electronic recirculating valve facing down and the handle of the
throttling valve pointing away from the return valve when in the open position.
4. Once assembly is complete, mount the bracket to the center rack at the rear of the machine using the existing
hardware.
Return and
Throttling
Valve
Summary of Contents for Case IH 3050 Series
Page 60: ......
