50
MANUAL NETWORK CREATION
1. Press Configure Networks at the bottom of the Network Settings screen.
2. Enter a name for the network in the SSID field.
3. Select the desired security level. If a secured network is selected, enter the desired
Password.
4. If desired, select Data Restriction to limit the amount of data that is transferred via
the network.
5. If desired, select Auto-Connect to allow devices to automatically connect to this
network.
CREATING A PERSONAL HOTSPOT
Creating a Personal Hotspot will allow other devices to connect to, and use, the CRX
Internet source. To create a Personal Hotspot:
1. Press Hotspot.
2. Select the Enable Wi-Fi Hotspot checkbox. The SSID number displayed will the be
network name. The Password is the password to connect to the network.
SCREEN CAPTURE
NOTE:
CRX will store the last ten screen captures. CRX will begin replacing
stored screen shots after ten screens are captured. Refer to the
section on page 51 to transfer screen shots to a
USB drive for viewing.
There are two ways to capture screen shots:
•
•
USING SCREEN CAPTURE TOOL
1. Press the Screen Capture
icon on the bottom of the screen.
2. To move files from the CRX to a USB stick, perform the steps in the
