C
HAPTER
3
14
ICD Sidekick Pro Injection for Case Trident Installation Manual
FILL PLUMBING ASSEMBLY AND INSTALLATION
1. Assemble the fill plumbing components based on tank quantity and configuration. The next few images shows
different pump and tank assembly configurations based on needed tank and pump quantities.
FIGURE 13. Trident Fill Assembly for One Pump and Two Tanks
NOTE:
When assembling a single pump, dual tank configuration, loosely mount the mounting bracket and
jam nuts to the dry disconnect fittings prior to installed the dry disconnect fittings to the plumbing
assembly.
FIGURE 14. Trident Fill Assembly for Two Pumps and Two Tanks
1" Banjo Dry Disconnect
1” to 3/4”
Reducing Nipple
3/4” 3-Way
Ball Valve
3/4” Street Elbow
3/4” Nipple
3/4” Nipple
3/4” MNPT to 1”
Hose Barb
Jam Nut
3/4” MNPT to 1” Hose Barb Elbow
To Pump
From Tank 1
From Tank 2
1" Banjo Dry
Disconnect
3/4” MNPT to 1”
Hose Barb Elbow
3/4” MNPT to 1”
Hose Barb
3/4” 3-Way
Ball Valve
Jam Nut
From Tank 1
From Tank 2
To Pump 1
To Pump 2
1" to 3/4” Reducing
Nipple
Summary of Contents for ICD Sidekick Pro
Page 48: ...CHAPTER 5 44 ICD Sidekick Pro Injection for Case Trident Installation Manual ...
Page 57: ...P N 016 0171 675 Rev A 53 SYSTEM DIAGRAMS ...
Page 58: ...CHAPTER 6 54 ICD Sidekick Pro Injection for Case Trident Installation Manual ...
Page 60: ...INDEX 56 ICD Sidekick Pro Injection for Case Trident Installation Manual ...