Raven RCM, Calibration And Operation Manual

CHAPTER

1

Important Information: Safety

1

CHAPTER 1

IMPORTANT INFORMATION

SAFETY

Follow the operation and safety instructions included with the implement and/or controller and read this manual 

carefully before installing or operating this Raven system.
• Follow all safety information presented within this manual. Review implement operation with your local dealer.
• Contact a local Raven dealer for assistance with any portion of the installation, service, or operation of Raven 

equipment.

• Follow all safety labels affixed to system components. Be sure to keep safety labels in good condition and 

replace any missing or damaged labels. Contact a local Raven dealer to obtain replacements for safety labels.

Observe the following safety measures when operating the implement after installing this Raven system:
• Do not operate this Raven system or any agricultural equipment while under the influence of alcohol or an 

illegal substance.

• Be alert and aware of surroundings and remain in the operator seat at all times when operating this Raven 

system.

•

Do not operate the implement on any public road with this Raven system enabled.

•

Disable this Raven system before exiting the operator seat.

•

Determine and remain a safe working distance from obstacles and bystanders. The operator is 

responsible for disabling the system when a safe working distance has diminished.

•

Disable this Raven system prior to starting any maintenance work on the implement or components 

of this Raven system.

• Do not attempt to modify or lengthen any of the system control cables. Extension cables are available from a 

local Raven dealer.

AGRICULTURAL CHEMICAL SAFETY

Follow all federal, state, and local regulations regarding the handling, use, and disposal of agricultural chemicals, 

products, and containers. Triple-rinse and puncture or crush empty containers before properly disposing of them. 

Contact a local environmental agency or recycling center for additional information.
• Always follow safety labels and instructions provided by the chemical manufacturer or supplier.

NOTICE

WARNING