Initial Machine Calibration: Initial Machine Calibration
23
INITIAL MACHINE CALIBRATION
3. Drive forward between 1 - 4 mph [2 - 6 kph].
4. Press the foot/resume switch or use the on-screen arrow to begin calibration.
5. The display will show progress of the auto-steering calibration.
FIGURE 24. Calibration in Process Screen
6. Once the calibration process is complete, select the
Accept
button.
WARNING
The machine will steer automatically. While
calibrating or operating the SC1/TC1 system, be
sure the area around the vehicle is clear of
people and obstacles before engaging the
steering system.
To disengage auto-steering at any time, turn the
steering wheel or select the on-screen Stop
button.
WARNING
Always remain in control of the machine. During
the auto-steering calibration, the machine will
make several hard left and right turns. Adjust the
vehicle speed and location as necessary.
