CHAPTER 6
52
Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Towed Implements
CONFIGURE GPS IN THE SC1/TC1
FIGURE 1. GPS Setup Screen
POSITION ACCURACY SETUP
FIGURE 2. Position Accuracy Setup Screen
•
Status
- Displays the absolute status of the GPS accuracy. Statuses that may be displayed in this area include:
◦
No Signal
◦
Error
◦
Converging
◦
Converged
•
Current Accuracy
- A value representing the reported horizontal accuracy of the current solution as detected
by the receiver.
•
Accuracy Threshold
- Set the maximum distance allowed for the Current Accuracy value. If the Current
Accuracy value is greater than the set Accuracy Threshold, a DTC entry will be recorded on the Diagnostic
Trouble Code screen.
Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
