CHAPTER
3
Initial Machine Calibration:
9
CHAPTER 3
INITIAL MACHINE CALIBRATION
WARNING
The machine will steer automatically. While
calibrating or operating the SC1/TC1 system, be
sure the area around the vehicle is clear of
people and obstacles before engaging the
steering system.
To disengage auto-steering at any time, turn the
steering wheel or select the on-screen Stop
button.
WARNING
During the auto-steering calibration, the machine
will make several hard left and right turns. Adjust
the vehicle speed and location as necessary.
NOTICE
Calibration of the machine steering system
should be performed in a field or other large,
open space and with conditions similar to normal
vehicle operation.
If the ground or surface is slippery, muddy, or
freshly tilled, the SC1/TC1 system may learn
incorrect steering responses for normal
operating conditions.
Ensure the machine hydraulics are operating
properly and there are no other mechanical
issues that may affect the performance of the
SC1/TC1 system.
