Scanner Setup Guide
Getting started with Raven Scanner
1
What’s in the box
2
Install the scanner
3
Connect to the power and internet
Scanner Main Unit
Paper Tray
2.2
Pull out the output tray to extend
fully. Raise the paper stopper to
prevent the paper from falling.
3.1
For ethernet connection (optional),
connect one end of your Ethernet LAN
cable to an available port of your
Ethernet Hub. Connect the other end to
to the port at the back of the product.
2.1
Open the panel unit by pulling
the lever, install the paper chute
by aligning and inserting the tabs
of the paper chute into their slots
on the scanner. Snap panel unit
into place.
Power Cables
3.2
Connect one end of the power
cable to the power receptacle of the
product. Connect the other end to
an appropriate power outlet. Turn
the switch to the “on” position.
2.3
Extra replacement pad modules
are included for future replacement
needs.
Replacement Pad Module
3.1
3.2
Download the user manual at
raven.com/user-manuals
Our support team is available to answer any questions and take your feedback.
Call us at
1-800-713-9009
or email
support@raven.com
Version 4
17-07-2FM5040-C
