2
Tip 2:
Remove the batteries if the clock is not in use for an extended
period.
Please dispose of used batteries in a responsible manner. For further
information please contact your local authority.
Using the product
Setting the volume
−
Place the radio controlled talking button clock with base down on
a flat surface so that the black
“
Talk Button
”
is facing up.
−
To increase the volume, turn the
“Volume Wheel”
away from the
“DC Input Jack Socket”
.
−
To decrease the volume, turn the
“Volume Wheel”
towards the
“DC Input Jack Socket”
.
−
To check the volume level press the
“
Talk Button
”
and adjust the
“Volume Wheel”
until you are happy with the volume level.
Time and Date announcement
To hear a time or date announcement press the
“
Talk Button
”
.
−
One press for time
−
Second press for date
−
T
hird press will announce either ‘
UK time updated
’ this means
that the clock has picked up the radio-controlled time and date
signal and has set itself automatically
The time will adjust automatically when the clocks change in spring
and autumn for daylight saving.
If the clock announces ‘
UK time NOT updated
‘ then it has not yet
received the radio controlled time and date signal. In this instance
please press and hold the
“Mode Button”
for 5 seconds
until you
hear
‘UK time updated’
leave the clock by a window for 5 minutes
without pressing any of the buttons. After 5 minutes the clock should
be set. If not, please repeat the process.
If your clock is not receiving the signal it is likely to be due to location.
In this instance please set the clock manually (please see page 3).
Settings Menu
Press
“Mode Button”
and you will hear following options:
1. Set chime
– By pressing “Talk Button” choose Chime ON/Chime
OFF
2.
Set alarm “1”
- By pressing
“Talk Button” choose
a.
Alarm “1” ON / Alarm 1 OFF
