RavensBlight
– ASSEMBLY INSTRUCTIONS page 3.
This model can be built with either a moonlit sky or a sunset. Also, you can make a 'convertible' model so
you can change backgrounds.
For a Single Background: Cut out BACKGROUND PART 1 and BACKGROUND PART 2 (using either the
moonlit panels on Parts Page 5 and 6 or the sunset panels on Parts Page 7 and 8). Glue the black tab on
PART 2 to the back of the right hand panel on PART 1. Fold UPWARD along the seam where the two
PARTS meet, and then fold UPWARD along the remaining three black lines. Place the BACKGROUND in
position over the BASE as shown in Figure 8. Glue the five gray BASE tabs to the back of the
BACKGROUND panels.
Cut out the LEFT TREE and RIGHT TREE on Parts Page 9. Fold the gray tabs DOWNWARD and then
fold the black panels DOWNWARD. Position a tree on either side of the background as shown in Figure
9. Glue the black TREE panels to the back of the background panels. Glue the gray TREE tabs to the
bottom of the base.
Now carefully place the buildings over the matching color squares on the base and glue the buildings'
black tabs to the base as shown in Figure 10. Your model town is now complete!
For a 'Convertible' Background: Assemble the moonlit background as described above and connect the
background to the base. Add the trees on either side. Then cut out the two parts of the sunset
background and glue them together. Fold in the same manner as the moonlit background. Cut off about
an eighth of an inch from the far left and right sides of the sunset background and then slide the sunset
background into place directly in front of the moonlit background. You should now have a sunset diorama
as shown in Figure 11, but you can remove the sunset to reveal the moonlit sky whenever you choose.
FOR THE HEARSE: Cut out the HEARSE on Parts Page 9. Fold the eight gray tabs DOWNWARD. Fold
the front panel DOWNWARD. Fold the hood UPWARD. Fold the front windshield DOWNWARD (folding
along the roof line, above the glass). Now fold the side panels and back panel DOWNWARD. Glue the
gray tabs to the adjacent panels, gluing first the windshield, then the hood, and finally the front and back
panels. Your hearse should resemble Figure 12.
And that's everything... you now have your own haunted little ghost town (complete with transportation,
should you need to leave quickly).
