Company Confidential
34
Raveon Technologies Corp.
9. Debug Related Commands
Bench Testing
(Must be in command mode to test. Enter +++ at the keyboard to put unit into config/test mode.)
ATTD x
Various transmit test routines.
0 = Go back to normal mode. Stops the test.
1 = Random data transmit.
2 = Hop up/down one channel
3 = Force PLL to fast lock mode
4 = Transmit all 0s
5 = Transmit all 1s
6 = Enable the test points on the PCB.
7 = Transmit CW on center of channel
8 = Transmit preamble (101010 pattern)
ML x
Debug Message Level. By default and at power on, this level is set to 0
(no debug messages).
0 = no debug or diagnostic messages
1 = POCSAG and data reception realated message will come out serial port
2 = Verbose messages, Mostly used for factory and engineering puroises.
SHOW
Display an overview of the configuration.
Ping xxxx
Ping another modem over the air. Transmits a request to xxxx to see if
xxxx can hear the sending station. If it does, it answers with a response
transmission, containing its ID and the signal strength of the reception. .
STAT
Display statistics of how the modem is working.