Teenage Mutant Ninja Turtles™
9
|
P a g e
55” Cabinet Assembly
Note:
2 people are required, and ladders are recommended. Marquee assembly is
top heavy and can tip
over
!
1. Place cabinet in desired floor location. Remove upper back door and carefully place such that it will not fall
over or be damaged. Set up ladders next to the cabinet for marquee installation.
2. Locate the marquee assembly as well as the following hardware:
a. (6) black tamper proof Torx machine screws, ¼ - 20 thread, 1-1/2” long
b. (6) ¼” black split lock washers
c. (6) ¼” black flat washers
3. Using a T-27 bit, securely mount the marquee assembly atop the cabinet as shown in the assembly setup
diagram, avoiding any pinching/crushing of the wire harness which should pass through the access hole.
Connect marquee harness to cabinet harness, accessible through upper door.
