RAWLINK 36685, Instruction Manual

28

Micro SD card slot (11) 

(not included)

(1)  Requires a TF card above class 6.
(2)  Inserting and removing the TF card:
1.   Push the card into the slot in the right 

direction until the card is in place.

2.   When removing the card, press the card 

slightly, then take it out.

Please note:
(1)  Do not insert or remove the card when 

the device is working.

(2)  Note the correct direction to insert the 

card. Inserting the card incorrectly may 

damage it.

(3)  Once the card is inserted, the device will 

select the card as the default storage 

device. Any data already on the card may 

not be read.

(4)  If the card is not compatible with the 

device, try reinserting the card again.

(5)  Maximum capacity supported: 32GB

System settings

Time and date

: In standby mode, press and 

hold the Menu button to enter the system 

settings menu. Press Up and Down to move 

the cursor to the date option. Press OK to set.

Automatic shutdown

: On / Off 

Screen saver

: off  / 3 / 5 / 10 minutes

Language

: English / Simpli� ed Chinese / 

traditional Chinese / Japanese / Korean / 

Russian / Spanish / Arabic / Dutch / French / 

German / Italian / Portuguese

TV modes

: NTSC / PAL

Light source frequency

: 50 / 60

Image rotation

: on / off 

Formatting

: Cancel / OK

Version

: Version number

Photography

: 

Put the camera into camera mode. The video 

symbol will appear in the top left corner 

of the screen. Press the OK button to start 

video recording. The symbol in the top left 

corner of the screen will start � ashing. Press 

OK again to stop the video. The symbol will 

disappear from the top left corner of the 

screen.

Video mode option

:

Resolution: FHD 1080P, HD720P, VGA480P

Loop recording

:

Off  / 1 / 2 / 3 / 5 minutes

Exposure compensation

:

EV-2.0EV-5/3 at EV-4/3, EV-1.0EV-2/3, EV-1/3, 

EV+0.0, EV+1/3, EV+2/3, EV+1.0, EV+3/4, 

EV+5/3, EV+2.0

Video and audio

: On / Off 

G-sensor

: High / Middle / Low

Photo models and photo set

1.   Press the Power button. The camera 

goes into camera mode. Press the Mode 

button to access photo mode. A photo 

symbol appears in the upper left of the 

screen. You are now in photo mode.

2.   Press OK. A click will sound and a preview 

picture will appear. About 1 second later, 

take the picture. Hold the camera steady 

as far as possible so as not to aff ect the 

image quality.

Shooting methods

: Single shot

Resolution

: 12M / 10M/ 8M / 5M / 3M / 2M / 

1.3 M / VGA

Shoot

: On / Off 

Image quality

: High quality / Standard / 

Economy

Sharpness

: Strong / Standard / Downy