19
Re-assemble the appliance
Re-assemble the appliance in reverse order. Refit boiler and
cooker burner assemblies.
Re-connect solenoid electrical supply to cooker burner
assembly.
Re-connect electronic ignition unit to the boiler gas valve.
Re-connect ignitor lead to ignition unit.
Replace hotplate.
Test fully for gas soundness.
Test the Appliance and Installation
Ensure that gas is turned on at both of the service cocks and
electrical supply is ON.
Following the sequence in
COMMISSIONING
INSTRUCTIONS.
To fit new burner
Follow instructions in section Burner Cleaning of Servicing
Instructions and remove the cooker burner assembly.
1.
Remove two pilot assembly screws.
2.
Remove two screws securing injector bracket. a
3.
Remove burner and transfer all ancillary items.
4.
Fit new burner.
5.
Re-assemble in reverse order.
To fit new burner injector
Follow instructions in section Burner Cleaning of Servicing
Instructions and remove the cooker burner assembly.
1.
Refer to the above and remove the burner.
2.
Unscrew injector.
3.
Fit replacement.
4.
Re-assemble in reverse order.
Replacement of Parts - Cooker