SEE FIG. 32
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, BURNER REMOVAL, Steps 1 to 5 and
DISMANTLE BURNERS Steps 1 to 3.
1.
Insert flat bladed screwdriver in LH side of c.box, as
diagram.
2.
Repeat as above for RH side.
3.
Gently pull c.box away from mounting plate.
4.
Fit new c.box, re-assemble in reverse order.
SEE FIG. 33
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, BURNER REMOVAL, Steps 1 to 5 and
DISMANTLE BURNERS Steps 1 to 3.
1.
Remove control box as detailed above.
2.
Unplug PEC.
3.
Undo wire connections 11 & 12 (noting colour polarity)
4.
Withdraw PEC cable.
5.
Slacken and remove PEC clip (note orientation of clip).
6.
Transfer and secure clip to new PEC.
7.
Fit new PEC, re-assemble in reverse order.
22
Replacement of parts
(Burner)
PEC
CONTROL BOX
FIG. 32
FIG. 33
DESN 511249
DESN 511250
Summary of Contents for Heatranger 480D
