SEE FIG. 8
1.
Remove the top oven door and place in a safe
position.
2.
Remove side and base access doors using hex. driver.
3.
Thoroughly clean top, side and base flueways through
access apertures with brush.
4.
Remove all debris with vacuum cleaner.
5.
Replace side and base access doors. Secure in
position using hex. driver.
NOTE:
Further access to base flueway is available if
diverter baffle is removed (replace baffle if removed).
6.
Brush and clean in between hotplate ribs on
underside.
7.
Examine soft rope seal located around hotplate
aperture in top plate. Replace if frayed or damaged.
8.
Replace hotplate ensuring the underside ribs lie over
the oven, and that it seals to the top plate.
7
OVEN & HOTPLATE FLUEWAY
CLEANING
Cleaning
FIG. 8
DESN 510535
Summary of Contents for Heatranger 480D
