SEE FIG. 10
Follow instructions in sections BURNER ACCESS, Steps
1 to 3 and BURNER REMOVAL, Steps 1 to 5.
COOKER FAN
1.
Carefully remove 2 push on connectors (noting
terminals) and earth connection.
2.
Remove 4 securing screws.
3.
Re-assemble in reverse order.
BOILER FAN
1.
Unplug ribbon strip in boiler fan motor.
2.
Remove 4 securing screws.
3.
Re-assemble in reverse order.
SEE FIG. 11
Follow instructions in sections BURNER ACCESS, Steps
1 to 3 and BURNER REMOVAL, Steps 1 to 6.
1.
Remove 8 burner head securing screws.
2.
Disconnect plug on fan mounting plate.
SEE FIG. 12
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, BURNER REMOVAL, Steps 1 to 6 and
DISMANTLE BURNERS, Steps 1 to 2.
1.
Carefully remove 2 push on connectors on pressure
switch.
2.
Carefully remove 2 air tubes.
3.
Remove 2 air pressure switch securing screws and
nuts.
4.
Fit new switch, re-assemble in reverse order.
PLEASE NOTE: CORRECT POSITIONS.
FAN MOTOR
DISMANTLE BURNERS
AIR PRESSURE SWITCH
FIG. 10
FIG. 11
FIG. 12
DESN 511128 A
DESN 511129
DESN 511130
Replacement of parts (Burner)
10
Summary of Contents for Heatranger 480GB
