RCT150A PARTS MANUAL
800.392.2686
5
Information
Machine Specs
Updated 1.28.2018 EGR
Page
2
of
4
The following specifications shall constitute minimum requirements for a Tracked Carrier with rubber tracks and a 275HP
Diesel Engine.
Bidders shall show in the right hand column, under “we will furnish”, how the unit proposed meets or exceeds this
specification.
General - RCT150
We Will Furnish
Operating Height: 120” (297.2cm)
Ground Clearance: 20” (50.8cm)
Length Carrier only: 224” (569cm)
Width: 101.5” (257.8cm)
Weight Carrier only: 20,500lbs (9,299 kg)
Max Carrying Capacity: 15,000lbs (6800kg)
Finish: Yellow and Black Powder Coat Paint
Engine
We Will Furnish
Model: Caterpillar C7.1B, Tier 4 Final, Twin Turbocharged
Number of cylinders: 6
Bore: 4.13” (105mm)
Stroke: 5.32” (135mm)
Displacement: 434 cu. in / 7.1L
Gross HP at maximum no load RPM: 275HP @2200 RPM
Maximum rated torque: 927lb-ft (1257 N-m)@1400 RPM
Cooling medium: Liquid cooled radiator
Air Cleaner: Dry type with Pre-Cleaner and Safety Element
Oil Filter: Spin-on type
Engine Oil Capacity: HI level- 17 Quarts (16.1L)
LOW Level- 15 Quarts (14.2L)
Operating Angles: Front Up-41°, Down-47°, Sides-41°
Fuel Tank Capacity: 55 gallons (208L)
Electrical System: 12 volts/100 Amp Alternator
Master Electrical Switch
Valves: Overhead Displacement
Battery: (2) 1000 CCA
Tractor Design
We Will Furnish
Large Front Step
Grab Handles
Removable Floor Plan (Battery access)
Easy-Fill Hydraulic and Fuel Tanks
(4) Recessed Front LED Lights
Backup Alarm
RH side Spot Mirror
Rear 2.5" Receiver Hitch
Fire Extinguisher, 2.5lb
Pilot Operated Joystick Controls
Suspension Seat
Undercarriage
We Will Furnish
Suspension Bogey-Style
Track Roller Frame,
Updated 1.28.2018 EGR
Page
2
of
4
The following specifications shall constitute minimum requirements for a Tracked Carrier with rubber tracks and a 275HP
Diesel Engine.
Bidders shall show in the right hand column, under “we will furnish”, how the unit proposed meets or exceeds this
specification.
General - RCT150
We Will Furnish
Operating Height: 120” (297.2cm)
Ground Clearance: 20” (50.8cm)
Length Carrier only: 224” (569cm)
Width: 101.5” (257.8cm)
Weight Carrier only: 20,500lbs (9,299 kg)
Max Carrying Capacity: 15,000lbs (6800kg)
Finish: Yellow and Black Powder Coat Paint
Engine
We Will Furnish
Model: Caterpillar C7.1B, Tier 4 Final, Twin Turbocharged
Number of cylinders: 6
Bore: 4.13” (105mm)
Stroke: 5.32” (135mm)
Displacement: 434 cu. in / 7.1L
Gross HP at maximum no load RPM: 275HP @2200 RPM
Maximum rated torque: 927lb-ft (1257 N-m)@1400 RPM
Cooling medium: Liquid cooled radiator
Air Cleaner: Dry type with Pre-Cleaner and Safety Element
Oil Filter: Spin-on type
Engine Oil Capacity: HI level- 17 Quarts (16.1L)
LOW Level- 15 Quarts (14.2L)
Operating Angles: Front Up-41°, Down-47°, Sides-41°
Fuel Tank Capacity: 55 gallons (208L)
Electrical System: 12 volts/100 Amp Alternator
Master Electrical Switch
Valves: Overhead Displacement
Battery: (2) 1000 CCA
Tractor Design
We Will Furnish
Large Front Step
Grab Handles
Removable Floor Plan (Battery access)
Easy-Fill Hydraulic and Fuel Tanks
(4) Recessed Front LED Lights
Backup Alarm
RH side Spot Mirror
Rear 2.5" Receiver Hitch
Fire Extinguisher, 2.5lb
Pilot Operated Joystick Controls
Suspension Seat
Undercarriage
We Will Furnish
Suspension Bogey-Style
Track Roller Frame,
Updated 1.28.2018 EGR
Page
3
of
4
Rollers and Idlers, Lifetime Lubrication
Drive Sprocket, 20 Tooth
Track Rollers: 8 each side
Track: Rubber, 700mm (27.72”) x 100 x 98
Ground Pressure Carrier only: 2.28psi (15.7kPa)
Ground Pressure Max Carrying Capacity: 4 psi (27.6kPa)
Travel Speed
We Will Furnish
High Range: 6.8MPH Maximum
Low Range: 4.1MPH Maximum
CAN Display Panel
We Will Furnish
Fuel Level
Engine Coolant Temperature
Tachometer
Voltmeter
Hour Meter
Diesel Exhaust Fluid Level
Hydraulic Oil Temperature
Throttle Raise/Lower
Two Speed Hi/Low
Safety Shutdowns
We Will Furnish
Caterpillar J1939 Engine Shutdowns
Hydraulic System
We Will Furnish
Closed Loop
O-ring Face Seal, Hose and Fittings
Hydraulic Reservoir: 27 Gallons (102.2L)
Oil Type:
Megaflow™ AW HVI Hydraulic Oil 46
Cooling System
We Will Furnish
Front mounted Hydraulic Cooler
Easy Remove Pre-Screen
Primary Engine Radiator Core in Front
Engine Sucker Fan
RCT150 Dump Bed
We Will Furnish
(2) Dump Cylinders:4" bore x 30" stroke
Bed Internal dimensions: 122" long x 94" wide x 14” tall
4 Cubic Yard Capacity
Height of bedsides: 14"
Weight of 10’ dump bed and Track Carrier: 23,900lbs
(10,841kg)
Angle of dump: 58 degrees
Flip down Bedsides
Tailgate with auto tailgate latch
Bed safety pin lock
Operator protection screen/canopy
Updated 1.28.2018 EGR
Page
3
of
4
Rollers and Idlers, Lifetime Lubrication
Drive Sprocket, 20 Tooth
Track Rollers: 8 each side
Track: Rubber, 700mm (27.72”) x 100 x 98
Ground Pressure Carrier only: 2.28psi (15.7kPa)
Ground Pressure Max Carrying Capacity: 4 psi (27.6kPa)
Travel Speed
We Will Furnish
High Range: 6.8MPH Maximum
Low Range: 4.1MPH Maximum
CAN Display Panel
We Will Furnish
Fuel Level
Engine Coolant Temperature
Tachometer
Voltmeter
Hour Meter
Diesel Exhaust Fluid Level
Hydraulic Oil Temperature
Throttle Raise/Lower
Two Speed Hi/Low
Safety Shutdowns
We Will Furnish
Caterpillar J1939 Engine Shutdowns
Hydraulic System
We Will Furnish
Closed Loop
O-ring Face Seal, Hose and Fittings
Hydraulic Reservoir: 27 Gallons (102.2L)
Oil Type:
Megaflow™ AW HVI Hydraulic Oil 46
Cooling System
We Will Furnish
Front mounted Hydraulic Cooler
Easy Remove Pre-Screen
Primary Engine Radiator Core in Front
Engine Sucker Fan
RCT150 Dump Bed
We Will Furnish
(2) Dump Cylinders:4" bore x 30" stroke
Bed Internal dimensions: 122" long x 94" wide x 14” tall
4 Cubic Yard Capacity
Height of bedsides: 14"
Weight of 10’ dump bed and Track Carrier: 23,900lbs
(10,841kg)
Angle of dump: 58 degrees
Flip down Bedsides
Tailgate with auto tailgate latch
Bed safety pin lock
Operator protection screen/canopy
Updated 1.28.2018 EGR
Page
3
of
4
Rollers and Idlers, Lifetime Lubrication
Drive Sprocket, 20 Tooth
Track Rollers: 8 each side
Track: Rubber, 700mm (27.72”) x 100 x 98
Ground Pressure Carrier only: 2.28psi (15.7kPa)
Ground Pressure Max Carrying Capacity: 4 psi (27.6kPa)
Travel Speed
We Will Furnish
High Range: 6.8MPH Maximum
Low Range: 4.1MPH Maximum
CAN Display Panel
We Will Furnish
Fuel Level
Engine Coolant Temperature
Tachometer
Voltmeter
Hour Meter
Diesel Exhaust Fluid Level
Hydraulic Oil Temperature
Throttle Raise/Lower
Two Speed Hi/Low
Safety Shutdowns
We Will Furnish
Caterpillar J1939 Engine Shutdowns
Hydraulic System
We Will Furnish
Closed Loop
O-ring Face Seal, Hose and Fittings
Hydraulic Reservoir: 27 Gallons (102.2L)
Oil Type:
Megaflow™ AW HVI Hydraulic Oil 46
Cooling System
We Will Furnish
Front mounted Hydraulic Cooler
Easy Remove Pre-Screen
Primary Engine Radiator Core in Front
Engine Sucker Fan
RCT150 Dump Bed
We Will Furnish
(2) Dump Cylinders:4" bore x 30" stroke
Bed Internal dimensions: 122" long x 94" wide x 14” tall
4 Cubic Yard Capacity
Height of bedsides: 14"
Weight of 10’ dump bed and Track Carrier: 23,900lbs
(10,841kg)
Angle of dump: 58 degrees
Flip down Bedsides
Tailgate with auto tailgate latch
Bed safety pin lock
Operator protection screen/canopy
Updated 1.28.2018 EGR
Page
3
of
4
Rollers and Idlers, Lifetime Lubrication
Drive Sprocket, 20 Tooth
Track Rollers: 8 each side
Track: Rubber, 700mm (27.72”) x 100 x 98
Ground Pressure Carrier only: 2.28psi (15.7kPa)
Ground Pressure Max Carrying Capacity: 4 psi (27.6kPa)
Travel Speed
We Will Furnish
High Range: 6.8MPH Maximum
Low Range: 4.1MPH Maximum
CAN Display Panel
We Will Furnish
Fuel Level
Engine Coolant Temperature
Tachometer
Voltmeter
Hour Meter
Diesel Exhaust Fluid Level
Hydraulic Oil Temperature
Throttle Raise/Lower
Two Speed Hi/Low
Safety Shutdowns
We Will Furnish
Caterpillar J1939 Engine Shutdowns
Hydraulic System
We Will Furnish
Closed Loop
O-ring Face Seal, Hose and Fittings
Hydraulic Reservoir: 27 Gallons (102.2L)
Oil Type:
Megaflow™ AW HVI Hydraulic Oil 46
Cooling System
We Will Furnish
Front mounted Hydraulic Cooler
Easy Remove Pre-Screen
Primary Engine Radiator Core in Front
Engine Sucker Fan
RCT150 Dump Bed
We Will Furnish
(2) Dump Cylinders:4" bore x 30" stroke
Bed Internal dimensions: 122" long x 94" wide x 14” tall
4 Cubic Yard Capacity
Height of bedsides: 14"
Weight of 10’ dump bed and Track Carrier: 23,900lbs
(10,841kg)
Angle of dump: 58 degrees
Flip down Bedsides
Tailgate with auto tailgate latch
Bed safety pin lock
Operator protection screen/canopy
Updated 1.28.2018 EGR
Page
2
of
4
The following specifications shall constitute minimum requirements for a Tracked Carrier with rubber tracks and a 275HP
Diesel Engine.
Bidders shall show in the right hand column, under “we will furnish”, how the unit proposed meets or exceeds this
specification.
General - RCT150
We Will Furnish
Operating Height: 120” (297.2cm)
Ground Clearance: 20” (50.8cm)
Length Carrier only: 224” (569cm)
Width: 101.5” (257.8cm)
Weight Carrier only: 20,500lbs (9,299 kg)
Max Carrying Capacity: 15,000lbs (6800kg)
Finish: Yellow and Black Powder Coat Paint
Engine
We Will Furnish
Model: Caterpillar C7.1B, Tier 4 Final, Twin Turbocharged
Number of cylinders: 6
Bore: 4.13” (105mm)
Stroke: 5.32” (135mm)
Displacement: 434 cu. in / 7.1L
Gross HP at maximum no load RPM: 275HP @2200 RPM
Maximum rated torque: 927lb-ft (1257 N-m)@1400 RPM
Cooling medium: Liquid cooled radiator
Air Cleaner: Dry type with Pre-Cleaner and Safety Element
Oil Filter: Spin-on type
Engine Oil Capacity: HI level- 17 Quarts (16.1L)
LOW Level- 15 Quarts (14.2L)
Operating Angles: Front Up-41°, Down-47°, Sides-41°
Fuel Tank Capacity: 55 gallons (208L)
Electrical System: 12 volts/100 Amp Alternator
Master Electrical Switch
Valves: Overhead Displacement
Battery: (2) 1000 CCA
Tractor Design
We Will Furnish
Large Front Step
Grab Handles
Removable Floor Plan (Battery access)
Easy-Fill Hydraulic and Fuel Tanks
(4) Recessed Front LED Lights
Backup Alarm
RH side Spot Mirror
Rear 2.5" Receiver Hitch
Fire Extinguisher, 2.5lb
Pilot Operated Joystick Controls
Suspension Seat
Undercarriage
We Will Furnish
Suspension Bogey-Style
Track Roller Frame,
Updated 1.28.2018 EGR
Page
3
of
4
Rollers and Idlers, Lifetime Lubrication
Drive Sprocket, 20 Tooth
Track Rollers: 8 each side
Track: Rubber, 700mm (27.72”) x 100 x 98
Ground Pressure Carrier only: 2.28psi (15.7kPa)
Ground Pressure Max Carrying Capacity: 4 psi (27.6kPa)
Travel Speed
We Will Furnish
High Range: 6.8MPH Maximum
Low Range: 4.1MPH Maximum
CAN Display Panel
We Will Furnish
Fuel Level
Engine Coolant Temperature
Tachometer
Voltmeter
Hour Meter
Diesel Exhaust Fluid Level
Hydraulic Oil Temperature
Throttle Raise/Lower
Two Speed Hi/Low
Safety Shutdowns
We Will Furnish
Caterpillar J1939 Engine Shutdowns
Hydraulic System
We Will Furnish
Closed Loop
O-ring Face Seal, Hose and Fittings
Hydraulic Reservoir: 27 Gallons (102.2L)
Oil Type:
Megaflow™ AW HVI Hydraulic Oil 46
Cooling System
We Will Furnish
Front mounted Hydraulic Cooler
Easy Remove Pre-Screen
Primary Engine Radiator Core in Front
Engine Sucker Fan
RCT150 Dump Bed
We Will Furnish
(2) Dump Cylinders:4" bore x 30" stroke
Bed Internal dimensions: 122" long x 94" wide x 14” tall
4 Cubic Yard Capacity
Height of bedsides: 14"
Weight of 10’ dump bed and Track Carrier: 23,900lbs
(10,841kg)
Angle of dump: 58 degrees
Flip down Bedsides
Tailgate with auto tailgate latch
Bed safety pin lock
Operator protection screen/canopy
Summary of Contents for RCT150A
