3
25.400
25.400
The landing gear installation instruction(Optional accessories)
：
Camera Installation Instruction (Optional):
Installation Instructions for Drone Protection Cover :
(
figure
12）
(
figure
10）
(
figure 11
）
(
figure
9）
(
figure
7）
(
figure 8
）
(
figure
6）
(
figure
4）
(
figure 5
）
Take the landing skid and place it into the support frame(Figure 10/11). Firmly
screw (PA2.0x10 screws) in the landing skid to the frame with a screwdriver
(Figure 12).
(
figure 1
）
(
figure 2
）
(
figure 3
）
front
back
bladeA
bladeA
bladeB
bladeB
Remote control installation instructions:
1. Use screwdriver to open the battery cover
（
figure 1
）
2. Base on the instruction in the battery slot to put
battery
（
figure 2
）
3. Tighten the screws in battery cover
（
figure 3
）
Blade installaction location:
B
B
B
B
B
B
A
A
A
A
B
B
B
B
B
B
VI
D
E
O
Take the camera and place it into the battery cover.(Image 4/5 )Firmly screw
(PA2.0×10 screws)in the camera to the battery cover with a screwdriver .Then
attach the camera cable to the drone .(Image6)
Take the drone protection cover and place it into the motor shell.(Image 7 /8 )
Firmly screw (PB1.4×6 screws) to screws hole with a screwdriver .(Image 9)
Power switch
