Caution
Filter
Inlet
UV Lamp
Dust or hair in the inlet may result in reduced
performance. Clearly remove foreign materials
blocking the inlet using a soft brush or fabric.
Push the hook to remove
the UV lamp grill in the
direction of the arrow.
When cleaning, please make
sure the UV lamp protective
tube is not broken.
Foreign substances clinging onto the lamp may reduce
performance. Please clean the lamp on a regular basis.
Use dry fabric or cleaning
towels to clean the
surroundings of the UV
lamp protective tube.
1
1
2
2
Push back the filter to the
end until you hear a “click”
sound, and reposition
the dust box back in
the product.
4
A blocked inlet may cause
abnormal sounds or
overheating, which may
result in malfunction or fire.
Before cleaning, ensure that
RAYCOP is unplugged from
the power outlet.
3
Note: If the filter is
clogged, you may
notice that the suction
is weaker. Clean the
filter with a mixture of
water:detergent (ratio 9:1).
To avoid dust from scattering into the air,
submerge both the dust box and filter in
water and remove the filter from the dust box.
For more maintenance and parts replacement
(such as: the UV-lamp & HEPA filter) information,
please visit raycop.com/maintain
Pull out the
dust box as
shown below.
Air dry your filter in a
shaded area, do not use a
dryer. Once dry, secure the
filter back into the dust box.
Caution
Warning
C
LE
AN
ING
YOUR RAYCO
P L
ITE
Summary of Contents for LITE
Page 1: ......
Page 13: ...NOTES ...
Page 14: ...NOTES ...
Page 15: ...www raycop com support raycop com 866 8RAYCOP 872 9267 ...