2.2 Units
The R180 indicates wind speed in miles per hour (mph), meters per second
(m/s) or kilometers per hour (km/h). Current units are indicated by a green
light “on” beside the selected unit. To change units press simultaneously the
Down and Up button. Note that the Limit set will be automatically converted
in the new unit.
Fig 5: Change the measurement unit of the R180 display
UNIT CURRENTLY SELECTED
PRESS BOTH BUTTONS AT THE
SAME TIME TO CHANGE THE
UNIT OF MEASURE
2.3 Limit Setting
As soon the UP or DOWN button is pressed the display enter automatically
in the limit setting mode. To change the limit use the UP or DOWN buttons
repeatedly to increase or decrease the limit. Holding down the UP or DOWN
buttons will increase the editing speed. When inished wait 5 seconds without
pressing any buttons and the display will return to the normal mode by itself.
If the wind blows at a speed exceeding the speed limit, the
“Limit” light will turn on and the internal buzzer will be heard.
15
R180 Wireless Wind Speed Indicator
Installation and Operation Manual
55M0180GSE00-E
