The purpose of this manual is to provide the customer with the operating
procedures essential for the promotion of proper machine operation for
its intended purpose. It is important to over-stress proper usage. All
information in this manual should be read and understood before any
attempt is made to operate the machine.
Since the manufacturer has no direct control over machine application
and operation, conformance with good safety practice in this area is the
responsibility of the user and his operating personnel.
All procedures herein are based on the use of the system under proper
operating conditions, with no deviations from the original design.
Alteration and/or modiication of the equipment is strictly forbidden
without written approval from RaycoWylie Systems.
The R180 WindSpeed Indicator is to be regarded only as an aid to the
operator.
This system must never be used, under any circumstances, as a substitute
for the good judgment of a crane operator when carrying out approved
crane-operating procedures. Responsibility for the safe operation of
the crane lies with the crane operator. The indicator equipment will
not necessarily prevent crane damage due to overloading and related
causes if not set properly.
Before operating a crane equipped with a Wylie system indicator, the
operator must carefully read the information in both this manual and
the crane manufacturer operator’s manual. He must also have read
and understood federal, state and local regulations applicable to his
job. Correct functioning of the system depends upon routine daily
inspection.
Any suspected faults or apparent damage should be immediately
reported to the responsible authority before using the crane.
5
R180 Wireless Wind Speed Indicator
Installation and Operation Manual
55M0180GSE00-E
