Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 1000W
～
2000W laser
10
e
）
Please inspect the output head carefully for dust or other contaminations. Use appropriate
lens paper to clean it if necessary.
f
）
The high temperature laser in summer is easy to produce dew and cause permanent damage.
Please make sure that the water cooling machine stops at the same time when the laser
stops.
g
）
The freezing of cooling water inside the low-temperature laser in winter will cause
permanent damage. Please ensure the continuous operation of the water-cooling machine
under the shutdown state of the laser.
h
）
Failure to follow the specified instructions may result in the loss of laser power, and such
loss will not be covered by the warranty.
2.7 Properties of Products
Table 5 Properties of Products
Model
RFL-A1000D
RFL-A1500D
RFL-A2000D
Optical Parameters
Nominal Output Power (W)
1000
1500
2000
Operation Modes
CW/Modulated
Polarization State
Random
Output Power Tunability(%)
10
～
100
Emission Wavelength(nm)
915±10
Output Power Instability(%)
＜
3
Modulation Frequency(Hz)
50~10k
Red Guide Laser Power(mW)
0.25
～
1
Output Cable Parameters
Output header type
iHQB
Fiber Core Diameter(μm)
300
400
400/600
The minimum bending radius of the output fiber cable(μm)
≥200
≥300
≥300/400
受
控
武汉锐科
