Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 1000W
~
2000W laser
33
4.6.7 Wiring in Internal Control Mode
Figure 22 Wiring in Internal Control Mode
4.6.8 The Operation Procedure of Internal Control Mode
a
)
Disconnect DB25 control interface’s PIN17 and PIN18, Select internal control mode.
b
)
Connect to AC power, and the “Power” indicator on the front panel light on;
c
)
Waiting for 10s until the internal main control board circuit initialization is completed
;
d
)
Setting the power of the laser by upper computer software, then send a command of
emitting laser.
e
)
Short-circuit DB25 control interface’s PIN15 and PIN16 to enable the laser.
受
控
武汉锐科