Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 500W
～
2000W laser
10
f
）
The high temperature laser in summer is easy to produce dew and cause permanent damage.
Please make sure that the water cooling machine stops at the same time when the laser
stops.
g
）
The freezing of cooling water inside the low-temperature laser in winter will cause
permanent damage. Please ensure the continuous operation of the water-cooling machine
under the shutdown state of the laser.
h
）
Failure to follow the specified instructions may result in the loss of laser power, and such
loss will not be covered by the warranty.
2.7 Properties of Products
Table 5Properties of Products
Model
RFL-A500D
RFL-A1000D
RFL-A1500D
RFL-A2000D
Optical Parameters
Nominal Output Power (W)
500
1000
1500
2000
Operation Modes
CW/Modulated
Polarization State
Random
Output Power Tunability(%)
10
～
100
Emission Wavelength(nm)
915±10
Output Power Instability(%)
＜
3
Modulation Frequency(Hz)
50~5k
Red Guide Laser Power(mW)
0.25
～
1
Output Cable Parameters
Output header type
QBH
Fiber Core Diameter(μm)
300
400
600
The minimum bending radius of the output fiber
cable(μm)
≥300
≥
300
≥
400
Half Angle of beam divergence
（
rad
）
≤0.22
Delivery Cable Length(m)
10
（
Length customizable
）
受
控
武汉锐科
