35
Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C20000M-CE
6.3. In ON Mode, the Laser Emission Power is Externally Controlled by Analog Signal
Raycus Laser
XP3(Serial Interface)
XP5(Ethernet Interface)
XP4(Analog Interface)
1
2
XP2
17
18
19
20
(Security Interface)
AC INPUT
Figure 18In ON mode, the wiring diagram of the power and laser emission controlled by analog signal
Operations Steps
a) Turn the knob switch on the rear panel to“ON”
b)Turn the key switch to“ON”
c) Open the Raycus Laser Control System
d)Click the guide laser “ON” button to view the guide laser
e) Turn on the “AD” mode and turn on “External Control” mode (this mode can be memorized after
power off)
f)Click the main power “ON”
g)Waiting for “Ready”
h)The control board card outputs power analog and emit control signal.
PC
AC POWER
~380VAC
Analog value(0~ 10V)
Serial port line
Ethernet cable
Interlock1
L1
L3
L2
PE
MOD+
MOD -
Peripheral
Equipment
Interlock2
Analog GND
