22
4.4.2 TCP/IP Interface Configuration
The default IP address of this product is 192. 168.0. 10, only supporting UDP communication.
The laser listens for connection on port is 8098, and the command must be sent in a single data
string.
Table 8 The pin definitions of Ethernet interface
PIN
FUNCTION
DESCRIPTION
1
TX+
T
2
TX-
TRANSMIT-
3
RX+
4
N/C
NONE
5
N/C
NONE
6
RX-
RECEIVE-
7
N/C
NONE
8
N/C
NONE
For better communication stability, recommend to use this interface first.
Table 9 The default IP address of the laser
The default IP address of the laser
IP address
192.168.0.10
Subnet mask
255.255.255.0
Steps of Ethernet connection:
Open “Local Connection” on your computer, and then click “property”;
Configure TCP/IP, select "Use the following IP address";
Click the “Property”;
Check “Use the following IP address:” to manually assign an IP address;
Manually assign an IP address is 192. 168.0. x
(
x cannot be 10, because 192. 168.0. 10 has
been assigned to the laser
)
, and assign a subnet mask address. The default is 255.255.255.0;
Click the " OK" button to confirm the settings and exit. The IP address is different from
the default gateway, see Figure 9.
