Chapter 2
Basic information
2
BASIC INFORMATION
2.1
Introduction
This operating manual describes the general handling of SUPERSCAN II deflection units.
Refer to the rating plate to determine the present type.
This operating manual contains important information on qualified and safe handling of the
deflection unit. You should therefore familiarize yourself with the content of this manual before
using the deflection unit for the first time. In case of any queries, please contact RAYLASE.
The operating manual must be accessible to anyone who will be involved in developing, in-
stalling or using a laser device featuring the RAYLASE deflection unit. If the deflection unit is
sold on, this operating manual or an authorized copy must be passed on with it.
2.2
Intended use
The deflection unit is developed for two-dimensional deflection and focus laser radiation in a
suitable working range. If the materials to be processed generate toxic fumes, a secure suc-
tion must be ensured.
The deflection unit is designed for use in industrial environment and for use by trained profes-
sionals exclusively. It is made as a subassembly for laser devices. The deflection unit should
be operated only with the specified wavelengths, laser power and beam diameters listed in
the corresponding data sheet.
2.3
Package contents
Standard:
Deflection unit
Optional:
F-Theta lens, protective glass
Control card
Connecting cable between control card and deflection unit
Software package
8
RAYLASE 2-Axis Deflection Unit SS-II
MN065_v1.0.1
