2.3 Compatible transducers for Axiom™ MFDs
Depending on your MFD variant you can connect the following transducer types directly to your MFD:
Axiom DV (Using 9–pin connection)
• DownVision™ transducers
• CHIRP conical beam transducers that utilize the 9 pin DownVision™ connector.
• Other transducers can be connected using available adaptor cables. Refer to
for a list of available adaptor cables. Refer to the Raymarine® website for
compatible transducers:
Axiom RV (Using 25–pin connection)
• RealVision™ 3D transducers
• DownVision™ transducers using available adaptor cables. Refer to
for a list of available adaptor cables.
• CHIRP conical beam transducers using available adaptor cables. Refer to
for a list of available adaptor cables.
• Non-CHIRP transducer can be connected using available adaptor cables. Refer to
for a list of available adaptor cables. Refer to the Raymarine® website
for compatible transducers:
Axiom Chartplotter
Axiom Chartplotter only variants require a networked Sonar module to enable Sonar.
RealVision transducers
The transducers listed below can be connected directly to RealVision™ 3D variant MFDs.
1
•
RV-100
RealVision™ 3D plastic transom mount transducer (A80464)
2
•
RV-200
RealVision™ 3D bronze 0° thru-hull all-in-one transducer (A80465)
•
RV-212P
and
RV-212S
RealVision™ 3D bronze 12° thru-hull split-pair transducers
(T70318)
–
RV-212P
port transducer (A80466)
–
RV-212S
starboard transducer (A80467)
•
RV-220P
and
RV-220S
RealVision™ 3D bronze 20° thru-hull split-pair transducers
(T70319)
–
RV-220P
port transducer (A80468)
–
RV-220S
starboard transducer (A80469)
16
