Note:
1.
Refer to
Compatible transducers for Axiom™ MFDs
for more information on compatible transducers for your MFD variant.
2. Transducer extension cables are available.
3.
MFDs that do not have a built-in sonar module can be connected to a transducer via an
external CPxxx series sonar module.
RealVision™ 3D transducer extension cable
For best performance, cable runs should be kept to a minimum. However, for some installations it
may be necessary to extend the transducer cable.
• 3 m (9.8 ft), 5 m (16.4 ft), and 8 m (26.2 ft) transducer extension cables are available (part numbers:
3 m - A80475, 5 m - A80476, 8 m - A80477).
• It is recommended that a maximum of two cable extensions are used, with the total cable length
not exceeding 18 m (59 ft).
DownVision™ transducer extension cable
For best performance, cable runs should be kept to a minimum. However, for some installations it
may be necessary to extend the transducer cable.
• A 4 m (13.1 ft.) Transducer extension cable (A80273) is available.
• It is recommended that only one cable extension is used.
Axiom transducer adaptor cables
The following adaptor cable are available to enable connection of a wider selection of transducers.
Axiom DV adaptor cables
A80484
Axiom DV to 7-pin Embedded Transducer Adapter
A80485
Axiom DV to 7-pin CP370 Transducer Adapter
46
