4.
USB B to USB A cable (part number: A80579) — Not supplied.
5. HDMI cable (part number: A80219) — Not supplied.
6. Display’s
HDMI IN
connector.
Note:
• The
HDMI IN
and
VIDEO 2
connections share internal hardware and
cannot be used at the same time. If devices are connected to both
connections then the
HDMI IN
connection will take priority.
• The video feed connected to the
HDMI IN
and
VIDEO 2
connections are
NOT streamed on the ethernet network to other displays..
12.3 Accessory connection
The
ACCESSORY
connector can be used to connect an external memory
card reader or external storage device to the display.
The following functions require a card reader attached to the display:
• use of electronic cartography — alternatively cartography can be shared
from a networked display that does have a card reader attached.
• updating product software — alternatively if your display has a connection
to the internet you can check online for software updates.
• import and export user data (waypoints, routes and tracks) — alternatively
user data can be imported and exported from a networked display that
does have a card reader attached.
• backup and restore settings — alternatively settings can be backed up and
restored from a networked display that does have a card reader attached.
• viewing pdf files
•
(1)
capturing and viewing screenshots or images (.png, .jpg files)
•
(2)
recording and viewing video files (.mov files )
• installation of third-party LightHouse app (.apk files) (for installation only;
apps cannot be run directly from storage device).
• connection of a compatible UAV (drone), for use with display’s UAV app,
requires Bulkhead Mount Micro USB Socket (A80630).
In addition to the storage uses listed above, the USB slot on the RCR-SDUSB
can also supply 0.5A of current to charge mobile devices.
1.
Display’s
ACCESSORY
connector.
2. Accessory device:
•
RCR-SDUSB
(part number: A80440) — Includes 1x SD card slot (or
MicroSD card when using an SD card adaptor) and 1x USB (Type A
connector) (e.g. for connection of an external USB hard drive or pen /
flash drive).
•
RCR-1
(part number A80585) — Includes 1x MicroSD card slot.
•
Bulkhead Mount Micro USB Socket
(part number: A80630) —
Includes 1x Micro USB (Type Micro A connector) (e.g. for connection of
an external USB hard drive or pen / flash drive; an additional adaptor
may be required for the connection of some USB devices).
• To store images (.png, .jpg files),
[External SD]
or
[External USB]
must be
selected as the
[Screenshot File]
location on the
[This display]
tab in the
main display settings menu (accessible from Homescreen).
• To store video (.mov files ),
[External SD]
or
[External USB]
must be selected
as the
[Save Files]
location on the
[Photo & Video recording]
tab in the
Video app settings menu.
For installation details for these devices, please refer to the instructions
provided with your accessory.
Warning: USB device power
Do NOT connect any device to the product’s USB connection
that requires an external power source.
55
Summary of Contents for AXIOM 2 XL
