Saving crash logs
If you experience problems with your display it is recommended that you
save display crash logs to memory card for future reference.
You may be requested to save crash logs when contacting technical support
it is advisable that you save crash logs before performing a reset of your
display.
1. Insert a memory card into your card reader.
2. Select
[Settings]
from the Homescreen..
3. Select the
[Network]
tab.
4. Select
[Diagnostics]
.
5. Select
[Save logs (#)]
to save logs from the current display, or
6. Select
[Save crash logs from all displays]
to save logs from all displays
on the network.
7. Select
[OK]
.
16.4 GNSS (GPS) troubleshooting
Problems with the GNSS (GPS) and their possible causes and solutions are
described here. Your position fix coordinates are displayed in the status area
located in the top left corner of the Homescreen.
Note:
Your product includes an internal GNSS (GPS) receiver that requires and
external antenna to operate correctly.
No position fix
Possible causes
Possible solutions
No external GNSS
(GPS) antenna
connected.
When using your product’s internal GNSS (GPS)
receiver an external antenna such as the GA150
must be connected to enable a position fix to be
obtained.
Internal GNSS (GPS)
receiver disabled.
When using your product’s internal GNSS (GPS)
receiver, ensure that it is enabled in the relevant
settings menu.
To access the relevant menu, select the status area
located in the top left corner of the Homescreen
and select
[Satellites]
and then select the
[Settings]
tab, locate the Internal GPS option and ensure it is
enabled.
External GNSS (GPS)
antenna connection
fault.
When using your product’s internal GNSS (GPS)
receiver, ensure that the connection to its external
antenna is secure and that the cabling is free from
damage.
External GNSS (GPS)
receiver connection
fault.
When using an external GNSS (GPS) receiver,
ensure that connections are secure and that the
cabling is free from damage.
External GNSS
(GPS) receiver or
antenna location
(e.g.: installed
below decks or
in close proximity
to equipment
which may cause
interference).
Ensure the GNSS (GPS) receiver or antenna has a
clear unobstructed view of the sky.
Refer to the documentation supplied with your
external receiver / antenna and ensure location
requirements have been adhered to.
Geographic
location or
prevailing conditions
preventing satellite
fix.
Check periodically to see if a fix is obtained in better
conditions or another geographic location.
65
Summary of Contents for AXIOM 2 XL
