Possible causes
Possible solutions
Damaged or fouled
transducer
Check the condition of the transducer ensuring it is
not damaged and is free from debris / fouling.
Damaged transducer
cable
Check that the transducer cable and connection
is free from damage and that the connections are
secure and free from corrosion.
Turbulence around
the transducer at
higher speeds may
affect transducer
performance
Slow vessel speed and recheck.
Interference from
another transducer
1.
Turn off the transducer causing the interference.
2. Reposition the transducers so they are further
apart.
Unit power supply
fault
Check the voltage from the power supply, if this is
too low it can affect the transmitting power of the
unit.
16.6 Wi-Fi troubleshooting
Before troubleshooting problems with your Wi-Fi connection, ensure that
you have followed the Wi-Fi location requirements guidance provided in the
relevant installation instructions and performed a power cycle/reboot of the
devices you are experiencing problems with.
Cannot find network
Possible cause
Possible solutions
Wi-Fi not currently
enabled on devices.
Ensure Wi-Fi is enabled on both Wi-Fi devices and
rescan available networks.
Some devices may
automatically turn
off Wi-Fi when not in
use to save power.
Power cycle / reboot devices and rescan available
networks.
Possible cause
Possible solutions
Device not
broadcasting.
1.
Try to enable broadcasting of the device’s
network using the Wi-Fi settings on the device
you are trying to connect to.
2. You may still be able to connect to the device,
when it is not broadcasting, by manually
entering the device’s Wi-Fi Name / SSID and
passphrase in the connection settings of the
device you are trying to connect.
Devices out of range
or signal being
blocked.
Move devices closer together or, if possible remove
the obstructions and then rescan available network.
Cannot connect to network
Possible cause
Possible solutions
Some devices may
automatically turn
off Wi-Fi when not in
use to save power.
Power cycle/reboot devices and retry the
connection.
Trying to connect
to the wrong Wi-Fi
network
Ensure you are trying to connect to the correct Wi-Fi
network, the Wi-Fi network’s name can be found in
the Wi-Fi settings on the broadcasting device (the
device that you are trying to connect to).
Incorrect network
credentials
Ensure you are using the correct passphrase, the
Wi-Fi network’s passphrase can be found in the
Wi-Fi settings on the broadcasting device (the
device that you are trying to connect to).
68
Summary of Contents for AXIOM 2 XL
