Implementation — direct connection to battery
• Where connection to a power distribution panel is not possible, the power
cable supplied with your product may be connected directly to the vessel's
battery, via a suitably rated fuse or breaker.
• If the power cable is NOT supplied with a fitted inline fuse, you MUST fit
a suitably rated fuse or breaker between the red wire and the battery’s
positive terminal.
• Refer to the inline fuse ratings provided in the product’s documentation.
• If you need to extend the length of the power cable supplied with your
product, ensure you observe the dedicated
Power cable extensions
advice
provided in the product’s documentation.
Item
Description
1
Waterproof fuse holder containing a suitably-rated inline fuse
must be fitted. For suitable fuse rating, refer to:
Inline fuse and
thermal breaker ratings
.
2
Product power cable.
3
Drain wire connection point.
Battery connection scenario A:
Suitable for a vessel with a common RF ground point. In this scenario, the
power cable’s drain wire should be connected to the vessel’s common
ground point.
Battery connection scenario B:
Suitable for a vessel without a common grounding point. In this case, the
power cable’s drain wire should be connected directly to the battery’s
negative terminal.
Grounding
Ensure that you observe any additional grounding advice provided in the
product’s documentation.
More information
It is recommended that best practice is observed in all vessel electrical
installations, as detailed in the following standards:
• BMEA Code of Practice for Electrical and Electronic Installations in Boats
• NMEA 0400 Installation Standard
• ABYC E-11 AC & DC Electrical Systems on Boats
• ABYC A-31 Battery chargers and Inverters
• ABYC TE-4 Lightning Protection
Warning: Product grounding
Before applying power to this product, ensure it has been
correctly grounded, in accordance with the instructions
provided.
Warning: Positive ground systems
Do not connect this unit to a system which has positive
grounding.
42
Summary of Contents for AXIOM 2 XL
