Page 4 of 18
WPTS/
MOB
WAYPOINT AT
CURSOR
WAYPOINT AT
VESSEL
WAYPOINT AT
POSITION…
GO TO WAYPOINT
OPTIONS…
REVIEW AND EDIT
WAYPOINTS...
ERASE WAYPOINT
SORT LIST
SET DEFAULT SYM
& GROUP...
WAYPOINT
GROUPS...
EDIT WAYPOINT…
EDIT DEFAULT
SET UP DEFAULT
SYMB GROUP
SET UP DEFAULT
SYMB GROUP
How do the controls work?
?
More information...
Press and hold
MENU
to display help information for the currently displayed soft keys.
For more information on the controls refer to
Chapter 2 - General Operation and System Set Up of the C-Series Display Reference Manual
The controls for your C-Series Display can be separated into two types:
Buttons
Soft keys
Buttons
- allow you to access various functions of the display, or change what you see on the screen.
Soft keys
- There are five soft keys below the screen. When a specific button is pressed the primary
soft key options for the active application are shown at the bottom of the screen.
Pressing a soft key will carry out one of the following functions:
- take an action.
- select one of several options.
- display on-screen information, dialog boxes or menus with new soft keys.
- display further soft key options.
Soft keys sometimes interact with other on-screen controls, such as dialog boxes - to edit names etc,
menus to select options.
D6
76
2_
2
Getting Started
Using the controls
Card No. 2
ROUTE
…
GOTO
…
FIND SHIP
…
TRACKS
…
PRESENTATION
…
