Restore Default
Menu item and description
Option(s)
[Simple Recovery]
Enables you to reset the camera settings back to
factory default.
The Web browser user interface may stop
responding once you have pressed the Save button.
If this occurs, it is recommended that you wait until
the camera starts to respond.
•
[Selected]
•
[Unselected]
[Full Recovery]
Enables you to reset
both
the camera settings and
IP address back to factory default.
The Web browser user interface may stop
responding once you have pressed the Save button.
If this occurs, it is recommended that you wait until
the camera starts to respond.
The camera IP address will change after initiating
a Full Recovery. For instructions on how to find
out the camera’s IP address, refer to the following
section:
p.46 — Camera setup via Windows 10 or
•
[Selected]
•
[Unselected]
[Reboot]
Enables you to power reboot the camera.
If you are experiencing problems with the CAM300,
it is recommended that you perform a Reboot
before attempting either the Simple Recovery or
Full Recovery option.
The Web browser user interface may stop
responding once you have pressed the Save button.
If this occurs, it is recommended that you wait until
the camera starts to respond.
•
[Selected]
•
[Unselected]
Local Setting menu
The settings found within this section are not supported by the CAM300.
Camera setup and operation via Windows 10 or Apple Mac PC
63
